Beta 43 Saildrive
32.6 kW / 43 hp @ 2,800 rpm

Beta Marine USA - marine diesel saildrive engines - SeaProp 60 saildive
Beta Marine USA - marine diesel saildrive engines - Beta 43SD heat exchanger saildrive engine

Beta 43 engine shown with optional Volvo 120S saildrive adaptor, shallow sump and 150mm high rise (to port) injection bend.

Technical Specifications

Power @ 2,800 rpm:32.6 kW43 hp
Aspiration:Natural
Cylinders:4
Displacement:1999 cc122 in3
Engine Weight:224 kg494 lbs
Engine & Saildrive Weight:274 kg604 lbs
Saildrive:SeaProp 60SD(Standard)
Alternator:70 Amp(Standard)
2 Bladed Folding Bronze Left Hand Propeller*:18″ x 14″
3 Bladed Fixed Aluminium Left Hand Propeller*:17″ x 14″

A general guidance for propeller size in inches, based upon 2 blade folding propeller LH or RH rotation and reduction ratio of 2:1. *For accurate individual advice please provide us with your vessels current full specifications.

Standard Specifications

  • EPA (U.S Environmental Protection Agency) Tier III – 40 CFR 1042 exhaust emission compliant.
  • Mechanically governed comes with:
    • Heat exchanger, header tank and water cooled exhaust manifold.
    • Fresh and sea water pump, injection bend for a wet exhaust.
    • Mechanical fuel lift pump, fuel and oil filtration.
    • Flywheel housing and drive plate with heavy inertia ring for super smooth running at low rpm.
    • Special quiet air intake filter.
    • Shallow sump.
  • 70 Amp, 12 Volt battery charging alternator.
  • Complete with ‘C Deluxe’ control panel with tachometer with running hour recorder, keystart switch, push button stop, green light for ‘power on’, red warning lights and audible alarm for: low oil pressure, high water temperature, domestic and engine alternator ‘no charge; 3m interconnection cable with multi-pin plug connector.
  • Heavy duty engine feet and flexible mountings.
  • ‘Morse’ type end fittings for engine speed and transmission control.
  • Engine test certificate and operators manual.
  • Beta red paint.
Beta Marine USA - marine diesel propulsion engines - kubota base engines
Beta Marine USA - marine diesel propulsion engines - 5 year self service warranty

*Valid for Recreational
Use Only!

SeaProp 60

The Beta Marine replacement engine and saildrive solution comprises of an appropriate new engine of choice fitted with a shallow sump mated to a Technodrive SeaProp 60 saildrive. Which when used in combination with our special feet option will drop into your existing Volvo or Yanmar saildrive GRP moulding.

Note: Replacing a Bukh saildrive leg will require the fitting of the Beta Marine optional GRP moulding as direct replacement to the existing mould.

The SeaProp 60 can accommodate a clockwise or anti-clockwise output rotation and is available in a reduction ratio of 2.15:1 or 2.38:1. Additionally, should your vessels hull design require it, the saildrive leg can be turned through 180 degrees so that the engine is directly over the propeller.

Beta Marine USA - marine diesel saildrive engines - saildrive
Beta Marine USA - Saildrive Solutions - SeaProp 60 180° Installation
Beta Marine USA - Saildrive Solutions - SeaProp 60 180° Installation

The Engine and SeaProp 60 package includes engine with shallow sump, housing to mate with the Seaprop 60 mounting bracket, through the hull fitting twin diaphragm seal and engine fresh water cooling valve. The transmission main structure is made of die-cast aluminium alloy, hardened and treated against corrosion. Additional protection against galvanic corrosion is guaranteed by sacrificial zinc anodes. The Engine and Seaprop 60 are not mated at the factory and shipped together, independently packed.

Technodrive / Twin Disc
SeaProp 60SD Saildrive LegStandard
Beta Marine USA - marine diesel propulsion saildrives - 2 year self service warranty

*Valid for Recreational
Use Only!

SeaProp 60 Options
The new Beta Marine SeaProp 60 split anode kit replaces the original Technodrive / Twin Disc fitment and facilitates changing the saildrive sacrificial anode without having to first remove and later refit the propeller.

SeaProp 60SD Split Anode Kit

Beta Marine USA - marine propulsion saildrives - seaprop 60 split zinc anode

Adaptor Kit Options & Technical Drawings

The Beta Marine engine with adaptor solution consists of an appropriate engine of choice which is fitted with a shallow sump and a housing adaptor plate which can allow it to be mounted directly to your existing; Volvo 110S, Volvo 120S, Volvo 130S, Yanmar SD20 or Bukh saildrive.

Volvo
110S SaildriveNot Applicable
120S SaildriveStandard
130S SaildriveStandard
Bukh
Bukh SaildriveNot Applicable
Yanmar
SD20 SaildriveNot Applicable

Control Panel Options

Beta Marine offer a range of control panels to cater for various requirements. Click on any of the thumbnail images to view a larger more detailed image of the control panel. Find out more…

Beta Marine USA - marine diesel propulsion engine - control panel A

A Panel
Optional

Beta Marine USA - marine diesel propulsion engine - control panel ABV

ABV Panel
Optional

Beta Marine USA - marine diesel propulsion engine - control panel ABVW

ABVW Panel
Optional

Beta Marine USA - marine diesel propulsion engine - control panel B

B Panel
Optional

Beta Marine USA - marine diesel propulsion engine - control panel BW

BW Panel
Optional

Beta Marine USA - marine diesel propulsion engine - control panel C

C Deluxe Panel
Standard

Beta Marine USA - marine diesel propulsion engine - control panel CW

CW Deluxe Panel
Optional

Alternator Options

We offer a selection of different alternator options (subject to additional cost) to suit most requirements for saildrive use. However, if you require an alternative solution with specific alternators we can usually design, manufacture and fit suitable alternator supports and pulley drives to suit your needs. Find out more…

Note: Minimum recommended battery: Not included.

12v 94Ah 620CCA

12 Volt Alternators
70 Amp, 12 Volt AlternatorStandard
120 Amp, 12 Volt Alternator in Lieu of StandardOptional
175 Amp, 12 Volt Secondary Domestic AlternatorOptional

Custom Engine Mounts

Beta Marine engines have been fitted into tens of thousands of vessels around the world using our standard engine feet. However engine bearers can vary immensely so when a problem arises, our solution is to offer our unique service of designing and manufacturing engine mounts to suit your individual engine bearers.

Having designed, manufactured and supplied thousands of bespoke engine mounts when required, the additional cost of this option is heavily repaid when your new engine just drops onto your existing engine bearers and lines up with your propeller shaft reducing installation complexity, time and labour. Find out more…

Dealer Network

When ordering an engine we always recommend that you talk to your local Beta Marine dealer about what you are looking for, so that you can agree a specification of the engine and accessories you require and they will then quote you. A list of authorised Beta Marine US dealers maybe found within the interactive map below. If your state or city has no convenient nearby dealer, or if you would like to become a Beta Marine US dealer, please contact us to discuss your requirements.

Filter By
NameStateAddressPhoneWebsite

Support Literature & Manuals

Beta Marine USA - marine diesel propulsion engines - heat exchanger illustrated parts list

Beta 43 – Beta 60
Illustrated Parts List

Beta Marine USA - marine diesel propulsion engines - technodrive seaprop 60 user manual

SeaProp 60 Saildrive
Operators Maintenance Manual

Saildrive Enquiry Form

reCAPTCHA is required.
Standard Specifications

Standard Specifications

  • EPA (U.S Environmental Protection Agency) Tier III – 40 CFR 1042 exhaust emission compliant.
  • Mechanically governed comes with:
    • Heat exchanger, header tank and water cooled exhaust manifold.
    • Fresh and sea water pump, injection bend for a wet exhaust.
    • Mechanical fuel lift pump, fuel and oil filtration.
    • Flywheel housing and drive plate with heavy inertia ring for super smooth running at low rpm.
    • Special quiet air intake filter.
    • Shallow sump.
  • 70 Amp, 12 Volt battery charging alternator.
  • Complete with ‘C Deluxe’ control panel with tachometer with running hour recorder, keystart switch, push button stop, green light for ‘power on’, red warning lights and audible alarm for: low oil pressure, high water temperature, domestic and engine alternator ‘no charge; 3m interconnection cable with multi-pin plug connector.
  • Heavy duty engine feet and flexible mountings.
  • ‘Morse’ type end fittings for engine speed and transmission control.
  • Engine test certificate and operators manual.
  • Beta red paint.
Beta Marine USA - marine diesel propulsion engines - kubota base engines
Beta Marine USA - marine diesel propulsion engines - 5 year self service warranty

*Valid for Recreational
Use Only!

SeaProp 60

SeaProp 60

The Beta Marine replacement engine and saildrive solution comprises of an appropriate new engine of choice fitted with a shallow sump mated to a Technodrive SeaProp 60 saildrive. Which when used in combination with our special feet option will drop into your existing Volvo or Yanmar saildrive GRP moulding.

Note: Replacing a Bukh saildrive leg will require the fitting of the Beta Marine optional GRP moulding as direct replacement to the existing mould.

The SeaProp 60 can accommodate a clockwise or anti-clockwise output rotation and is available in a reduction ratio of 2.15:1 or 2.38:1. Additionally, should your vessels hull design require it, the saildrive leg can be turned through 180 degrees so that the engine is directly over the propeller.

Beta Marine USA - marine diesel saildrive engines - saildrive
Beta Marine USA - Saildrive Solutions - SeaProp 60 180° Installation
Beta Marine USA - Saildrive Solutions - SeaProp 60 180° Installation

The Engine and SeaProp 60 package includes engine with shallow sump, housing to mate with the Seaprop 60 mounting bracket, through the hull fitting twin diaphragm seal and engine fresh water cooling valve. The transmission main structure is made of die-cast aluminium alloy, hardened and treated against corrosion. Additional protection against galvanic corrosion is guaranteed by sacrificial zinc anodes. The Engine and Seaprop 60 are not mated at the factory and shipped together, independently packed.

Technodrive / Twin Disc
SeaProp 60SD Saildrive LegStandard
Beta Marine USA - marine diesel propulsion saildrives - 2 year self service warranty

*Valid for Recreational
Use Only!

SeaProp 60 Options
The new Beta Marine SeaProp 60 split anode kit replaces the original Technodrive / Twin Disc fitment and facilitates changing the saildrive sacrificial anode without having to first remove and later refit the propeller.

SeaProp 60SD Split Anode Kit

Beta Marine USA - marine propulsion saildrives - seaprop 60 split zinc anode
Adaptor Kits & Technical Drawings

Adaptor Kit Options & Technical Drawings

The Beta Marine engine with adaptor solution consists of an appropriate engine of choice which is fitted with a shallow sump and a housing adaptor plate which can allow it to be mounted directly to your existing; Volvo 110S, Volvo 120S, Volvo 130S, Yanmar SD20 or Bukh saildrive.

Volvo
110S SaildriveNot Applicable
120S SaildriveStandard
130S SaildriveStandard
Bukh
Bukh SaildriveNot Applicable
Yanmar
SD20 SaildriveNot Applicable
Control Panel Options

Control Panel Options

Beta Marine offer a range of control panels to cater for various requirements. Click on any of the thumbnail images to view a larger more detailed image of the control panel. Find out more…

Beta Marine USA - marine diesel propulsion engine - control panel A

A Panel
Optional

Beta Marine USA - marine diesel propulsion engine - control panel ABV

ABV Panel
Optional

Beta Marine USA - marine diesel propulsion engine - control panel ABVW

ABVW Panel
Optional

Beta Marine USA - marine diesel propulsion engine - control panel B

B Panel
Optional

Beta Marine USA - marine diesel propulsion engine - control panel BW

BW Panel
Optional

Beta Marine USA - marine diesel propulsion engine - control panel C

C Deluxe Panel
Standard

Beta Marine USA - marine diesel propulsion engine - control panel CW

CW Deluxe Panel
Optional

Alternator Options

Alternator Options

We offer a selection of different alternator options (subject to additional cost) to suit most requirements for saildrive use. However, if you require an alternative solution with specific alternators we can usually design, manufacture and fit suitable alternator supports and pulley drives to suit your needs. Find out more…

Note: Minimum recommended battery: Not included.

12v 94Ah 620CCA

12 Volt Alternators
70 Amp, 12 Volt AlternatorStandard
120 Amp, 12 Volt Alternator in Lieu of StandardOptional
175 Amp, 12 Volt Secondary Domestic AlternatorOptional
Custom Engine Mounts

Custom Engine Mounts

Beta Marine engines have been fitted into tens of thousands of vessels around the world using our standard engine feet. However engine bearers can vary immensely so when a problem arises, our solution is to offer our unique service of designing and manufacturing engine mounts to suit your individual engine bearers.

Having designed, manufactured and supplied thousands of bespoke engine mounts when required, the additional cost of this option is heavily repaid when your new engine just drops onto your existing engine bearers and lines up with your propeller shaft reducing installation complexity, time and labour. Find out more…

Dealer Network

Dealer Network

When ordering an engine we always recommend that you talk to your local Beta Marine dealer about what you are looking for, so that you can agree a specification of the engine and accessories you require and they will then quote you. A list of authorised Beta Marine US dealers maybe found within the interactive map below. If your state or city has no convenient nearby dealer, or if you would like to become a Beta Marine US dealer, please contact us to discuss your requirements.

Filter By
NameStateAddressPhoneWebsite
Support Literature & Manuals

Support Literature & Manuals

Beta Marine USA - marine diesel propulsion engines - heat exchanger illustrated parts list

Beta 43 – Beta 60
Illustrated Parts List

Beta Marine USA - marine diesel propulsion engines - technodrive seaprop 60 user manual

SeaProp 60 Saildrive
Operators Maintenance Manual

Saildrive Enquiry Form

Saildrive Enquiry Form

reCAPTCHA is required.
Menu