Engine shown painted in customer specified ice white paint.
Beta 150
109.6 kW / 147 hp @ 2,800 rpm
Technical Specifications
| Power @ 2,800 rpm: | 109.6 kW | 147 hp |
| Aspiration: | Natural | |
| Cylinders: | 6 | |
| Displacement: | 6700 cc | 409 in3 |
| Weight: | 680 kg | 1499 lbs |
| Transmission: | TM170 | (Standard) |
| Alternator: | 90 Amp | (Standard) |
The Beta 150 is especially suitable for commercial vessels up to 24m in length. It is a heavy duty 6 cylinder, naturally aspirated, direct injection engine, producing 147 bhp (109.6 kW) at 2,800 rpm with a swept volume of 6,700 cc and develops exceptionally high torque of 440Nm at 1,400 rpm.
Standard Specifications
- Mechanically governed comes with:
- Heat exchanger, header tank and water cooled exhaust manifold.
- Fresh and sea water pump, injection bend for a wet exhaust.
- Mechanical fuel lift pump, fuel and oil filtration.
- Flywheel housing and drive plate with heavy inertia ring for super smooth running at low rpm.
- Special quiet air intake filter.
- 90 Amp, 12 Volt battery charging alternator.
- Complete with ‘C Deluxe’ control panel with tachometer with running hour recorder, keystart switch, push button stop, green light for ‘power on’, red warning lights and audible alarm for: low oil pressure, high water temperature, domestic and engine alternator ‘no charge; 3m interconnection cable with multi-pin plug connector.
- Heavy duty engine feet and flexible mountings.
- ‘Morse’ type end fittings for engine speed and transmission control.
- Engine test certificate and operators manual.
- Iveco blue paint.
Transmission Options & Technical Drawings
Beta Marine offer the following standard transmission options and reduction ratios. Transmissions have been selected to match the torque loading of each engine and will be correct for the majority of yachts, motor sailors or motor boats. Find out more…
| Technodrive / Twin Disc | |
| TM170 – Hydraulic | Optional |
| TMC880 – 7° Down Angle, Hydraulic | Optional |
| TMC265 – Hydraulic | Optional |
| TM265 – 7° Down Angle, Hydraulic | Optional |
| Bobtail – No Transmission |
|
| Bobtail Engine with Drive Plate & Housing Only | Optional |
Control Panel Options
Beta Marine offer a range of control panels to cater for various requirements. Click on any of the thumbnail images to view a larger more detailed image of the control panel. Find out more…
A Panel
Optional
ABV Panel
Optional
ABVW Panel
Optional
B Panel
Optional
BW Panel
Optional
C Deluxe Panel
Standard
CW Deluxe Panel
Optional
Flybridge Control
Optional
C/CW Panel – NMEA 2000 Module
Optional
D Digital Panel
Optional
Alternator Options
We offer a selection of different alternator options (subject to additional cost) to suit most requirements for heat exchanger engine use. However, if you require an alternative solution with specific alternators we can usually design, manufacture and fit suitable alternator supports and pulley drives to suit your needs. Find out more…
Note: Minimum recommended battery: Not included.
12v 180Ah 1050CCA
| 12 Volt Alternators | |
| 90 Amp, 12 Volt Alternator | Standard |
| 120 Amp, 12 Volt Alternator in Lieu of Standard | Optional |
| 175 Amp, 12 Volt Alternator in Lieu of Standard | Optional |
| 70 Amp, 12 Volt Insulated Return Alternator in Lieu of Standard | Optional |
| 100 Amp, 12 Volt Insulated Return Alternator in Lieu of Standard | Optional |
| 175 Amp, 12 Volt Secondary Domestic Alternator | Optional |
| 24 Volt Alternators |
|
| 55 Amp, 24 Volt Electric Start & Alternator | Optional |
| 80 Amp, 24 Volt Secondary Domestic Alternator | Optional |
| 60 Amp, 24 Volt Secondary Domestic Insulated Return Alternator | Optional |
Custom Engine Mounts
Beta Marine engines have been fitted into tens of thousands of vessels around the world using our standard engine feet. However engine bearers can vary immensely so when a problem arises, our solution is to offer our unique service of designing and manufacturing engine mounts to suit your individual engine bearers.
Having designed, manufactured and supplied thousands of bespoke engine mounts when required, the additional cost of this option is heavily repaid when your new engine just drops onto your existing engine bearers and lines up with your propeller shaft reducing installation complexity, time and labour. Find out more…
Support Literature & Manuals
Beta 150
Illustrated Parts List
TM93 & TM93A Transmission
Operators Maintenance Manual
PRM500 Transmission
Operators Maintenance Manual
ZF45, ZF45A & ZF63IV Transmission
Operators Maintenance Manual
Dealer Network
When ordering an engine we always recommend that you talk to your local Beta Marine dealer about what you are looking for, so that you can agree a specification of the engine and accessories you require and they will then quote you. A list of authorised Beta Marine US dealers maybe found within the interactive map below. If your state or city has no convenient nearby dealer, or if you would like to become a Beta Marine US dealer, please contact us to discuss your requirements.
Filter By
| Name | State | Address | Phone | Website |
|---|
Engine Enquiry Form
- Standard Specifications
-
Standard Specifications
- Mechanically governed comes with:
- Heat exchanger, header tank and water cooled exhaust manifold.
- Fresh and sea water pump, injection bend for a wet exhaust.
- Mechanical fuel lift pump, fuel and oil filtration.
- Flywheel housing and drive plate with heavy inertia ring for super smooth running at low rpm.
- Special quiet air intake filter.
- 90 Amp, 12 Volt battery charging alternator.
- Complete with ‘C Deluxe’ control panel with tachometer with running hour recorder, keystart switch, push button stop, green light for ‘power on’, red warning lights and audible alarm for: low oil pressure, high water temperature, domestic and engine alternator ‘no charge; 3m interconnection cable with multi-pin plug connector.
- Heavy duty engine feet and flexible mountings.
- ‘Morse’ type end fittings for engine speed and transmission control.
- Engine test certificate and operators manual.
- Iveco blue paint.
- Mechanically governed comes with:
- Transmissions & Technical Drawings
-
Transmission Options & Technical Drawings
Beta Marine offer the following standard transmission options and reduction ratios. Transmissions have been selected to match the torque loading of each engine and will be correct for the majority of yachts, motor sailors or motor boats. Find out more…
Technodrive / Twin Disc TM170 – Hydraulic Optional TMC880 – 7° Down Angle, Hydraulic Optional TMC265 – Hydraulic Optional TM265 – 7° Down Angle, Hydraulic Optional Bobtail – No Transmission
Bobtail Engine with Drive Plate & Housing Only Optional - Control Panel Options
-
Control Panel Options
Beta Marine offer a range of control panels to cater for various requirements. Click on any of the thumbnail images to view a larger more detailed image of the control panel. Find out more…
A Panel
OptionalABV Panel
OptionalABVW Panel
OptionalB Panel
OptionalBW Panel
OptionalC Deluxe Panel
StandardCW Deluxe Panel
OptionalFlybridge Control
Optional
C/CW Panel – NMEA 2000 Module
OptionalD Digital Panel
Optional - Alternator Options
-
Alternator Options
We offer a selection of different alternator options (subject to additional cost) to suit most requirements for heat exchanger engine use. However, if you require an alternative solution with specific alternators we can usually design, manufacture and fit suitable alternator supports and pulley drives to suit your needs. Find out more…
Note: Minimum recommended battery: Not included.
12v 180Ah 1050CCA
12 Volt Alternators 90 Amp, 12 Volt Alternator Standard 120 Amp, 12 Volt Alternator in Lieu of Standard Optional 175 Amp, 12 Volt Alternator in Lieu of Standard Optional 70 Amp, 12 Volt Insulated Return Alternator in Lieu of Standard Optional 100 Amp, 12 Volt Insulated Return Alternator in Lieu of Standard Optional 175 Amp, 12 Volt Secondary Domestic Alternator Optional 24 Volt Alternators
55 Amp, 24 Volt Electric Start & Alternator Optional 80 Amp, 24 Volt Secondary Domestic Alternator Optional 60 Amp, 24 Volt Secondary Domestic Insulated Return Alternator Optional - Custom Engine Mounts
-
Custom Engine Mounts
Beta Marine engines have been fitted into tens of thousands of vessels around the world using our standard engine feet. However engine bearers can vary immensely so when a problem arises, our solution is to offer our unique service of designing and manufacturing engine mounts to suit your individual engine bearers.
Having designed, manufactured and supplied thousands of bespoke engine mounts when required, the additional cost of this option is heavily repaid when your new engine just drops onto your existing engine bearers and lines up with your propeller shaft reducing installation complexity, time and labour. Find out more…
- Support Literature & Manuals
-
Support Literature & Manuals
Beta 150
Illustrated Parts ListTM93 & TM93A Transmission
Operators Maintenance ManualPRM500 Transmission
Operators Maintenance ManualZF45, ZF45A & ZF63IV Transmission
Operators Maintenance Manual - Dealer Network
-
Dealer Network
When ordering an engine we always recommend that you talk to your local Beta Marine dealer about what you are looking for, so that you can agree a specification of the engine and accessories you require and they will then quote you. A list of authorised Beta Marine US dealers maybe found within the interactive map below. If your state or city has no convenient nearby dealer, or if you would like to become a Beta Marine US dealer, please contact us to discuss your requirements.
Filter ByName State Address Phone Website - Engine Enquiry Form
-
Engine Enquiry Form