Beta 14
9.9 kW / 13.5 hp @ 3,600 rpm

Technical Specifications

Power @ 3,600 rpm:9.9 kW13.5 hp
Aspiration:Natural
Cylinders:2
Displacement:479 cc29 in3
Weight:90 kg199 lbs
Transmission:TMC40(Standard)
Alternator:40 Amp(Standard)

Standard Specifications

  • EPA (U.S Environmental Protection Agency) Tier III – 40 CFR 1042 exhaust emission compliant Recreational Use.
  • Mechanically governed comes with:
    • Heat exchanger, header tank and water cooled exhaust manifold.
    • Fresh and sea water pump, injection bend for a wet exhaust.
    • Mechanical fuel lift pump, fuel and oil filtration.
    • Flywheel housing and drive plate with heavy inertia ring for super smooth running at low rpm.
    • Special quiet air intake filter.
  • 40 Amp, 12 Volt battery charging alternator.
  • Complete with ‘ABV’ control panel with tachometer with running hour recorder, keystart switch, push button stop, green light for ‘power on’, red warning lights and audible alarm for: low oil pressure, high water temperature and engine alternator ‘no charge; 3m interconnection cable with multi pin plug connector.
  • Heavy duty engine feet and flexible mountings.
  • R&D flexible coupling.
  • ‘Morse’ type end fittings for engine speed and transmission control.
  • Engine test certificate and operators manual.
  • Beta red paint.

*Valid for Recreational
Use Only!

Transmission Options & Technical Drawings

Beta Marine offer the following standard transmission options and reduction ratios. Transmissions have been selected to match the torque loading of each engine and will be correct for the majority of yachts, motor sailors or motor boats. Find out more…

Technodrive / Twin Disc
TMC40 – MechanicalStandard
TMC60 – MechanicalOptional
TMC60A – 7° Down Angle, MechanicalOptional
Bobtail – No Transmission
Bobtail Engine with Drive Plate & Housing OnlyOptional
PRM Marine
PRM60 – MechanicalOptional
PRM90 – MechanicalOptional
PRM150 – HydraulicOptional
ZF
ZF15MIV – 15° V Drive, MechanicalOptional

Control Panel Options

Beta Marine offer a range of control panels to cater for various requirements. Click on any of the thumbnail images to view a larger more detailed image of the control panel. Find out more…

A Panel
Optional

ABV Panel
Standard

ABVW Panel
Optional

B Panel
Optional

BW Panel
Optional

C Deluxe Panel
Optional

CW Deluxe Panel
Optional

Flybridge Control
Optional

C/CW Panel – NMEA 2000 Module
Optional

D Digital Panel
Optional

Alternator Options

We offer a selection of different alternator options (subject to additional cost) to suit most requirements for heat exchanger engine use. However, if you require an alternative solution with specific alternators we can usually design, manufacture and fit suitable alternator supports and pulley drives to suit your needs. Find out more…

Note: Minimum recommended battery: Not included.

12v 70Ah 450CCA

12 Volt Alternators
40 Amp, 12 Volt AlternatorStandard
75 Amp, 12 Volt Alternator in Lieu of StandardOptional
120 Amp, 12 Volt Alternator in Lieu of StandardOptional
70 Amp, 12 Volt Insulated Return Alternator in Lieu of StandardOptional

Custom Engine Mounts

Beta Marine engines have been fitted into tens of thousands of vessels around the world using our standard engine feet. However engine bearers can vary immensely so when a problem arises, our solution is to offer our unique service of designing and manufacturing engine mounts to suit your individual engine bearers.

Having designed, manufactured and supplied thousands of bespoke engine mounts when required, the additional cost of this option is heavily repaid when your new engine just drops onto your existing engine bearers and lines up with your propeller shaft reducing installation complexity, time and labour. Find out more…

Support Literature & Manuals

Beta 10 – Beta 25
Illustrated Parts List

TMC40 Transmission
Operators Maintenance Manual

TMC60 Transmission
Operators Maintenance Manual

TMC60A Transmission
Operators Maintenance Manual

PRM60 Transmission
Operators Maintenance Manual

PRM90 Transmission
Operators Maintenance Manual

PRM150 Transmission
Operators Maintenance Manual

ZF15MIV & ZF25M Transmission
Operators Maintenance Manual

Dealer Network

When ordering an engine we always recommend that you talk to your local Beta Marine dealer about what you are looking for, so that you can agree a specification of the engine and accessories you require and they will then quote you. A list of authorised Beta Marine US dealers maybe found within the interactive map below. If your state or city has no convenient nearby dealer, or if you would like to become a Beta Marine US dealer, please contact us to discuss your requirements.

Filter By
NameStateAddressPhoneWebsite

Engine Enquiry Form

reCAPTCHA is required.
Standard Specifications

Standard Specifications

  • EPA (U.S Environmental Protection Agency) Tier III – 40 CFR 1042 exhaust emission compliant Recreational Use.
  • Mechanically governed comes with:
    • Heat exchanger, header tank and water cooled exhaust manifold.
    • Fresh and sea water pump, injection bend for a wet exhaust.
    • Mechanical fuel lift pump, fuel and oil filtration.
    • Flywheel housing and drive plate with heavy inertia ring for super smooth running at low rpm.
    • Special quiet air intake filter.
  • 40 Amp, 12 Volt battery charging alternator.
  • Complete with ‘ABV’ control panel with tachometer with running hour recorder, keystart switch, push button stop, green light for ‘power on’, red warning lights and audible alarm for: low oil pressure, high water temperature and engine alternator ‘no charge; 3m interconnection cable with multi pin plug connector.
  • Heavy duty engine feet and flexible mountings.
  • R&D flexible coupling.
  • ‘Morse’ type end fittings for engine speed and transmission control.
  • Engine test certificate and operators manual.
  • Beta red paint.

*Valid for Recreational
Use Only!

Transmissions & Technical Drawings

Transmission Options & Technical Drawings

Beta Marine offer the following standard transmission options and reduction ratios. Transmissions have been selected to match the torque loading of each engine and will be correct for the majority of yachts, motor sailors or motor boats. Find out more…

Technodrive / Twin Disc
TMC40 – MechanicalStandard
TMC60 – MechanicalOptional
TMC60A – 7° Down Angle, MechanicalOptional
Bobtail – No Transmission
Bobtail Engine with Drive Plate & Housing OnlyOptional
PRM Marine
PRM60 – MechanicalOptional
PRM90 – MechanicalOptional
PRM150 – HydraulicOptional
ZF
ZF15MIV – 15° V Drive, MechanicalOptional
Control Panel Options

Control Panel Options

Beta Marine offer a range of control panels to cater for various requirements. Click on any of the thumbnail images to view a larger more detailed image of the control panel. Find out more…

A Panel
Optional

ABV Panel
Standard

ABVW Panel
Optional

B Panel
Optional

BW Panel
Optional

C Deluxe Panel
Optional

CW Deluxe Panel
Optional

Flybridge Control
Optional

C/CW Panel – NMEA 2000 Module
Optional

D Digital Panel
Optional

Alternator Options

Alternator Options

We offer a selection of different alternator options (subject to additional cost) to suit most requirements for heat exchanger engine use. However, if you require an alternative solution with specific alternators we can usually design, manufacture and fit suitable alternator supports and pulley drives to suit your needs. Find out more…

Note: Minimum recommended battery: Not included.

12v 70Ah 450CCA

12 Volt Alternators
40 Amp, 12 Volt AlternatorStandard
75 Amp, 12 Volt Alternator in Lieu of StandardOptional
120 Amp, 12 Volt Alternator in Lieu of StandardOptional
70 Amp, 12 Volt Insulated Return Alternator in Lieu of StandardOptional
Custom Engine Mounts

Custom Engine Mounts

Beta Marine engines have been fitted into tens of thousands of vessels around the world using our standard engine feet. However engine bearers can vary immensely so when a problem arises, our solution is to offer our unique service of designing and manufacturing engine mounts to suit your individual engine bearers.

Having designed, manufactured and supplied thousands of bespoke engine mounts when required, the additional cost of this option is heavily repaid when your new engine just drops onto your existing engine bearers and lines up with your propeller shaft reducing installation complexity, time and labour. Find out more…

Support Literature & Manuals

Support Literature & Manuals

Beta 10 – Beta 25
Illustrated Parts List

TMC40 Transmission
Operators Maintenance Manual

TMC60 Transmission
Operators Maintenance Manual

TMC60A Transmission
Operators Maintenance Manual

PRM60 Transmission
Operators Maintenance Manual

PRM90 Transmission
Operators Maintenance Manual

PRM150 Transmission
Operators Maintenance Manual

ZF15MIV & ZF25M Transmission
Operators Maintenance Manual

Dealer Network

Dealer Network

When ordering an engine we always recommend that you talk to your local Beta Marine dealer about what you are looking for, so that you can agree a specification of the engine and accessories you require and they will then quote you. A list of authorised Beta Marine US dealers maybe found within the interactive map below. If your state or city has no convenient nearby dealer, or if you would like to become a Beta Marine US dealer, please contact us to discuss your requirements.

Filter By
NameStateAddressPhoneWebsite
Engine Enquiry Form

Engine Enquiry Form

reCAPTCHA is required.
Menu