Standard Specifications

• Not EPA Tier III compliant. This engine is only available in the USA for vessels that qualify for the EPA Engine Replacement Program and is only available to replace engine Tier 2 and below.
• Mechanically governed comes with:
  • Heat exchanger, header tank and water cooled exhaust manifold.
  • Fresh and sea water pump, injection bend for a wet exhaust.
  • Mechanical fuel lift pump, fuel and oil filtration.
  • Flywheel housing and drive plate with heavy inertia ring for super smooth running at low rpm.
  • Special quiet air intake filter.
• 40 Amp, 12 Volt battery charging alternator.
• Complete with ‘A’ control panel with running hour recorder, keystart switch, push button stop, green light for ‘power on’, red warning lights and audible alarm for: low oil pressure, high water temperature and engine alternator ‘no charge; 3m interconnection cable with multi pin plug connector.
• Heavy duty engine feet and flexible mountings.
• ‘Morse’ type end fittings for engine speed and transmission control.
• Engine test certificate and operators manual.
• Beta red paint.

Transmission Options & Technical Drawings

Beta Marine offers a wide variety of transmission options and reduction ratios. These have been selected to match the torque loading of each engine and with the various gear ratios available we have right transmission to fit your application. Find out more…

Technodrive / Twin Disc
TMC40 – Mechanical	Standard

Bobtail – No Gearbox
Bobtail Engine with Drive Plate & Housing Only	Optional

PRM Marine
PRM60 – Mechanical	Standard
PRM90 – Mechanical	Optional
PRM125 – Mechanical	Optional
PRM150 – Hydraulic	Optional

ZF
ZF15MIV – 15° V Drive, Mechanical	Standard

Control Panel Options

Beta Marine offer a range of control panels to cater for various requirements. Click on any of the thumbnail images to view a larger more detailed image of the control panel. Find out more…

Alternator Options

We offer a selection of different alternator options (subject to additional cost) to suit most requirements for heat exchanger engine use. However, if you require an alternative solution with specific alternators we can usually design, manufacture and fit suitable alternator supports and pulley drives to suit your needs. Find out more…

Note: Minimum recommended battery: Not included.

12v 70Ah 450CCA

12 Volt Alternators
40 Amp, 12 Volt Alternator	Standard
75 Amp, 12 Volt Alternator in Lieu of Standard	Optional
120 Amp, 12 Volt Alternator in Lieu of Standard	Optional
70 Amp, 12 Volt Insulated Return Alternator in Lieu of Standard	Optional

Custom Engine Mounts

Beta Marine engines have been fitted into tens of thousands of vessels around the world using our standard engine feet. However engine bearers can vary immensely so when a problem arises, our solution is to offer our unique service of designing and manufacturing engine mounts to suit your individual engine bearers.

Having designed, manufactured and supplied thousands of bespoke engine mounts when required, the additional cost of this option is heavily repaid when your new engine just drops onto your existing engine bearers and lines up with your propeller shaft reducing installation complexity, time and labour. Find out more…

Support Literature & Manuals

Beta 10 – Beta 25
Illustrated Parts List

TMC40 Transmission
Operators Maintenance Manual

PRM60 Transmission
Operators Maintenance Manual

PRM90 Transmission
Operators Maintenance Manual

PRM150 Transmission
Operators Maintenance Manual

ZF15MIV & ZF25M Transmission
Operators Maintenance Manual

Dealer Network

When ordering an engine we always recommend that you talk to your local Beta Marine dealer about what you are looking for, so that you can agree a specification of the engine and accessories you require and they will then quote you. A list of authorised Beta Marine US dealers maybe found within the interactive map below. If your state or city has no convenient nearby dealer, or if you would like to become a Beta Marine US dealer, please contact us to discuss your requirements.

Engine Enquiry Form

If you are human, leave this field blank.

Name *

Phone *

Email *

Confirm Email *

Boat Make & Model *

Current Engine *

Other Comments

Captcha *

reCAPTCHA is required.

SEND